Temperature Switches

Series T1X,T2X Explosion Proof Local Mount & Remote Bulb & Capillary Temperature Switches

Barksdale’s T1X & T2X Series Temperature Switches provide unmatched performance, quality & reliability in a mechanical thermostat - a safe solution for hazardous locations. The single set point T1X and dual set point T2X, can switch, measure & control temperatures from 50° to 600°F (-45° to 316°C), and meets Class 1, Div. 1 & 2 hazardous location requirements. The optional adjustable differential provides precise control. These switches can be mounted locally for control directly at the source or remotely up to 25 feet. The T1X & T2X Series are electrically rated for 10 amps @ 125/250 VAC & 3 amps @ 480 VAC. Standard 3 & 6 pin terminal strips simplify installation. The T1X & T2X Series are rated NEMA 4, 7 & 9 and incorporate stainless steel temperature sensors to handle a wide range of media. Optional thermowells allow the sensor to work in pressurized vessels to 5000 psi. The T1X & T2X Series are UL listed & CSA approved & ATEX Certified for hazardous zones within the European Community.
Series T1X,T2X
Explosion-Proof
High Accuracy
Remote, Local or Ambient Sensing
UL, CSA & ATEX Approved
 
 
 
Adjustment Instructions
Supplemental Guide
Data Sheet
 
Single Setpoint Switches
  Price 
  Standard -
H Hermetically sealed limit switch option - Class I, Division II (requires AA, CC or HH limit switch) $30.00
Sensing Type Price 
T Remote bulb & capillary $480.00
Set Point Price 
1 Single setpoint (SPDT) -
Enclosure Price 
X NEMA 4, 7, 9 & IP65 explosion proof enclosure -
Limit Switch (Must Select)
-H 10A @ 125/250 VAC; 3 A @ 480 VAC; .5A @24VDC  $-
-B 10 A @ 125/250/480 VAC; 2 A @ 600VAC $50.00
-J 10 amps @ 125/250 VAC; 3 amps @ 480 VAC (with elastomer boot) $50.00
-L 1 A @ 125 VAC; 1 A @ 24 VDC Gold Contact $18.00
-M 10 A @ 125/250 VAC; 3 A @ 480 VAC; $50.00
-S 10 A @ 125/250 VAC; Adjustable Differential $24.00
-GH 10 A @ 125 VAC; Gold Contact $24.00
-AA Hermetically Sealed; 4 A @ 125/250 VAC; $130.00
-HH Hermetically Sealed; 5 A @ 125/250 VAC; $100.00
-CC Hermetically Sealed; 10 A @ 125/250 VAC; $100.00
-GH Hermetically Sealed; 10 A @ 125/250 VAC; $100.00
Temperature Range
Remote sensor ranges
154 .-50o - 150oF -
251 .50o - 250oF -
351 150o - 350oF -
601 3000o - 440oF -
603 .-320o - 600oF -
Local mount sensor ranges
201 -40°F +75°F -
202 +15°F +140°F -
203 +75°F +200°F -
351 +100°F +225°F -
204 -40°F +200°F -
354 +100°F +350°F -
454 +150°F +450°F -
Wetted Material
  Brass sensor -
-S 304 stainless steel (6ft capillary for remote sensing models) $2.50
Capillary Length
  Blank = 6 foot capillary -
-12 12 Ft SS Sensor $31.50
Armor Option (Bulb & Capillary only)
- Blank = 6 foot capillary (With Armor) -
-A 302 stainless steel armor $3.00
-25A 25 Ft SS Sensor (With Armor) $250.00
Thermowell (Local Mount only)
-WS 316 stainless steel thermowell (local mount only) $85.00
-W Brass local mount Thermowell $45.00
Options
-EX ATEX certification $55.00
-Sxxx Factory pre-set (consult FLW) $5.00
 
Configured model number : - T1X -H 154 - - -WS
Configured price : $565.00*
 
Dual Setpoint Switches
  Price 
  Standard -
H Hermetically sealed limit switch option - Class I, Division II (requires AA, CC or HH limit switch) $30.00
Sensing Type Price 
T Remote bulb & capillary $480.00
Set Point Price 
2 Dual setpoint (2 SPDT) $240.00
Enclosure Price 
X NEMA 4, 7, 9 & IP65 explosion proof enclosure -
Limit Switch (Must Select)
-H 10A @ 125/250 VAC; 3 A @ 480 VAC; .5A @24VDC  $-
-B 10 A @ 125/250/480 VAC; 2 A @ 600VAC $100.00
-G 10 A @ 125/250/480 VAC; 2 A @ 600 VAC; MANUAL RESET $-
-J 10 amps @ 125/250 VAC; 3 amps @ 480 VAC (with elastomer boot) $100.00
-L 1 A @ 125 VAC; 1 A @ 24 VDC Gold Contact $36.00
-M 10 A @ 125/250 VAC; 3 A @ 480 VAC; $100.00
-S 10 A @ 125/250 VAC; Adjustable Differential $48.00
-GH 10 A @ 125 VAC; Gold Contact $48.00
-AA Hermetically Sealed; 4 A @ 125/250 VAC; $260.00
-HH Hermetically Sealed; 5 A @ 125/250 VAC; $200.00
-CC Hermetically Sealed; 10 A @ 125/250 VAC; $200.00
-GH Hermetically selaed; 1 Amps @ 125, Gold Contact $200.00
Temperature Range
Remote sensor ranges
154 .-50o - 150oF -
251 .50o - 250oF -
351 150o - 350oF -
601 3000o - 440oF -
603 .-320o - 600oF -
Local mount sensor ranges
201 -40°F +75°F -
202 +15°F +140°F -
203 +75°F +200°F -
351 +100°F +225°F -
204 -40°F +200°F -
354 +100°F +350°F -
454 +150°F +450°F -
Wetted Material
  Brass sensor -
-S 304 stainless steel (6ft capillary for remote sensing models) $2.50
Capillary Length
  Blank = 6 foot capillary -
-12 12 Ft SS Sensor $31.50
Armor Option (Bulb & Capillary only)
  Blank = 6 foot capillary (With Armor) -
-A 302 stainless steel armor (With Armor) $3.00
-25A 25 Ft SS Sensor (With Armor) $250.00
Thermowell (Local Mount only)
-WS 316 stainless steel thermowell (local mount only) $85.00
-W Brass local mount Thermowell $45.00
Options
-RD Manual reset (must use when selecting "G" limit switch option) $72.00
-EX ATEX certification $55.00
-Sxxx Factory pre-set (consult FLW) $10.00
 
Configured model number : - T2X -H 154 - - - -WS
Configured price : $805.00*
 
 
 
  Top of The Page
callCall - (800) 576- 6308 or Mail for assistance
create facebook